Multi Fuel Stoves With Back Boiler
A multi fuel stove with back boiler enables you to run a complete heating system in your home as in addition to providing hot water. They come with two water ports (1x return & 1x flow) that are 1 inch BSP in size and connect using standard compression fittings.
Features
Multi fuel stoves can be combined with back boilers to burn a variety of materials, other than logs. This provides you with an increased choice of heat sources and helps you reduce the carbon footprint. Multi fuel stoves are designed to burn a wider variety of materials with greater efficiency than wood burning stoves. In addition to standard logs multi fuel stoves that have back boilers will be capable of burning smokeless coal anthracite and peat or turf briquettes. These devices can either be fitted with raised grates that have moving bars, or with a central riddling grate and an asphan. Both of these options will enable the stove to de-ash frequently. Ash will be enclosed in an asphan below the combustion area to make it secure and easy removal.
Boiler stoves can generate up to 21kw of heat (14kw to heat water and 7kw multi fuel stove to heat space) depending on their model. They can be connected to an accumulator of hot water or a traditional boiler system, or work in conjunction with solar panel systems if needed. The boiler is housed within the stove and is typically in the back or side of the firebox. It is made out of steel that is rolled thickly, not fragile cast iron.
It is also less susceptible to corrosion since it can endure higher temperatures than cast iron stoves. The boiler may be pre-fitted to the stove or as a separate add on. There are usually two (sometimes four) pipes that extend from the back of the stove for connecting to plumbing pipes.
These pipes can be connected to an a hot water tank or directly into the radiator circuit in your home, with pumps switching on when the temperature of the water in the tank is at the desired level. This ensures that your radiators are heated first and foremost prior to the hot water to cook and bathe is provided – a good way of keeping bills low while protecting against freezing temperatures in winter.
Benefits
A multi-fuel stove that has back boiler provides additional advantages for heating your home. In addition to the heat that it generates from burning wood and other types of solid fuel, a multi fuel stove with a back boiler is also able to heat your hot water system. As a result, you can reduce the amount of electricity, gas or oil you use in your home as well as reduce carbon emissions.
The heat generated by a multi-fuel stove that has back boiler is used to heat the cold water that feeds into it through the bottom. The hot water can be used to heat your home as well as for bathing and domestic hot water taps.
If installed correctly, a boiler stove can be used to provide hot water for a smaller or larger central heating system or a thermal store, giving you greater energy efficiency and lower energy bills within your home. It can also be combined with solar panels or underfloor heating to further reduce your home’s energy costs and carbon footprint.
Multi-fuel stoves with back boilers can be used as a simple wood-burning unit for central heating or to connect to an accumulator tank. It is a flexible and cost-effective way to heat your home. It is possible to combine log boilers and back boiler and an existing gas central heating system to save money both on installation and operating costs.
Eco Design 2022-compliant stoves consume up to six times less fuel than previous models, reducing your fuel bill and your environmental impact. There are a range of models available, ranging from those that simply heat water to those that heat up to 22 radiators and offer hot water for your entire household.
The majority of multi fuel stoves that have back boilers have a simple bolt-in system that has two pipes protruding through the back of the stove, ready to connect to your plumbing pipework. Other models are equipped with a water jacket in which the body of the stove is an opening that can be filled with water and often with a pump to circulate the hot water.
Installation
The Ruben is an impressive stove that features a large ceramic window and silver door handles/controls and a back-boiler that is integrated for hot water and central heat (up to 7kw water heating and 8kw room heating). It has two water ports on the rear of the stove (1x flow & 1x return) with a size of 1.0 inch BSP (male 1 “”). It can be used with vented or non-vented systems.
A multi fuel stove that has a back boiler can be connected to a traditional central heating system via an easy non-return valve set up or to a thermal store tank with an overheat protection valve. A thermal storage tank is an insulated water tank that serves as a neutral point to the heat generated by the stove and stores it until needed.
To fit a wood burner with back boiler you will need to make sure that your local authority permits it and that the insurance company is happy with the work completed on a stove that is not listed with a back boiler. You will also need to ensure that your plumbing system can handle the additional power that’s expected to be generated. In most cases, you’ll have to change the plumbing in order for this to be possible.
If your installer has experience in this sort of work then they’ll be able provide you with the information required. However, beware of sanitary plumbers who claim to be heating engineers for solid fuel and might not be aware of the fundamentals involved in this kind of system. Stovesellers has been called upon on numerous occasions to rectify the mess created by other tradesmen. We can only suggest that you choose an engineer who understands what they are doing.
It is important to be aware that you will require larger capacity cylinders for a multifuel stove which has a back boiler. Also, the heat output from the stove must be carefully matched to the property in order to avoid running out of water and wasting money. This can be accomplished by dividing the total cubic meter of the room (length length x width x height) by 14, and then selecting the right model based on the information.
Maintenance
A 3kw multi fuel stove-fuel stove that has back boiler is a stove that can heat both hot water and radiators. These stoves are perfect for those who have smaller homes or want to reduce their carbon foot print by not relying on central heating systems.
The back boiler of these types of stoves consists of an extensive loop that connects the hot water tank to the radiators of your home. A thermostat in the home is able to monitor the temperature of this loop and when it reaches a set level, the pump for the radiators will turn on automatically. This ensures that the heating system in your home is controlled and prioritised.
One of the most appealing aspects of a Multi-fuel stove furnace stove with back boiler is the ability to burn wood as well as coal, allowing you to have more flexibility when it comes to the heating sources you use. It is essential to remember that the boiler will not provide free energy and you will have to add enough logs to meet your requirements.
When you install a multi-fuel stove with back boiler, it is vital to follow the safety rules for your area and country. This includes the distance and position of your stove with respect to the combustible surface. You will usually find these guidelines in the documentation of your stove, or by referring to local building codes.
When installing a multi-fuel stove with a back boiler, people often make the mistake of not correctly making the hearth. This can lead to numerous problems in the future, so it’s important to follow the correct procedure.
Installing your multi-fuel stove with a back boiler by a HETAS or certified heating engineer is the best way to make sure that it is installed correctly. They can check whether the stove is compatible with the existing system and also ensure that it complies with UK safety standards.